Going to cut everything off them both then weld all the Prado mounts onto the GQ housing. I don't want to change the rear suspension set up on the car, just use the stronger axle with same track width. They are 40mm wider overall, so I will get rid of my -44 rims and go back to 0 offset (which will be equiv of -20 rims)
Comments
I think i'll make it bolt on with some compression tube welded into the chassis rails first.
cleaning up the bits of chassis for final fitment status (not near ready to cut my daily up yet (:
Going to cut everything off them both then weld all the Prado mounts onto the GQ housing. I don't want to change the rear suspension set up on the car, just use the stronger axle with same track width. They are 40mm wider overall, so I will get rid of my -44 rims and go back to 0 offset (which will be equiv of -20 rims)
looks great mate, I was looking at doing the same thing with a spare 90 frame.
Started putting yota mounts onto GQ housing today... looks like i'll have a heap of plating and bracing in all the gaps to get it nice and strong